View B39202B8663P810_9075495.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

saw components saw duplexer lte band ii (pcs) series/type: ordering code: b8663 b39202-b8663-p810 date: version: november 18, 2014 2.1 ? epcos ag 2015. reproduction, publicati on and dissemination of this publicatio n, enclosures hereto and the information contained therein without epcos' pr ior express consent is prohibited. epcos ag is a tdk group company.
2 november 26, 2014 b8663 1880.0 / 1960.0 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet application n low-loss saw duplexer for mobile telephonelte band ii (pcs) systems n low insertion attenuation n low amplitude ripple n usable passband 60 mhz features n package size 1.8 x 1.4 mm 2 , max. height 0.475 mm n rohs compatible n approx. weight 0.0035 g n package for s urface m ount t echnology ( smt ) n ni, gold-plated terminals n e lectrostatic s ensitive d evice ( esd ) n m oisture s ensitive l evel 3 ( msl ) bottom view top view side view 0.3 4 0.35 0.25 0.25 8 4 8 1.4 1.8 1 2 3 6 5 7 5 6 1 2 3 7 0.5 max. 0.7 0.475 max 0.3 0.35 pin configuration n 3 tx input n 1 rx output n 6 antenna n 2, 4, 5, 7, 8 to be grounded 1 6 2,4,5 3 7,8,9 1 3 6 4,5 2,7,8
3 november 26, 2014 b8663 1880.0 / 1960.0 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. characteristicstemperature range for specification: t = ?0 ?c to +90 ?c ant terminating impedance: z ant = 50 ii 3.5 nh rx terminating impedance: z rx = 50 + 1.6 nh tx terminating impedance: z tx = 50 b8663 characteristics tx - ant min. typ. @ 25?c max. center frequency f c 1880.0 mhz maximum insertion attenuation 1852.5 ...1907.5 mhz lte 1) 1) averaged value of linear s-parameter over 5 mhz 1.6 2.5 db error vector magnitude @f carrier 1852.4 ...1907.6 mhz evm 2) 2) error vector magnitude (evm) based on definition given in 3gpp ts 25.141. 0.6 3.0 % input vswr (tx port) 1850.24 ...1909.76 mhz 1.3 2.0 output vswr (rx port) 1850.24 ...1909.76 mhz 1.3 2.0 attenuation 10.0 ... 787.0 mhz 30 43 db 728.0 ... 764.0 mhz 40 43 db 869.0 ... 894.0 mhz 38 41 db 1226.0 ... 1250.0 mhz 35 37 db 1559.0 ... 1585.5 mhz 41 45 db 1597.5 ... 1605.9 mhz 41 48 db 1605.8 ... 1680.0 mhz 30 40 db 1932.5 ... 1987.5mhz lte 44 52 db 2010.0 ... 2025.0 mhz 20 50 db 2110.0 ... 2155.0 mhz 30 33 db 2400.0 ... 2500.0 mhz 10 14 db 3700.0 ... 3820.0 mhz 27 30 db 4900.0 ... 5950.0 mhz 21 25 db 5550.0 ... 5730.0 mhz 23 27 db
4 november 26, 2014 b8663 1880.0 / 1960.0 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet characteristicstemperature range for specification: t = ?0 ?c to +90 ?c ant terminating impedance: z ant = 50 ii 3.5 nh rx terminating impedance: z rx = 50 + 1.6 nh tx terminating impedance: z tx = 50 b8663 characteristics ant - rx min. typ. @ 25?c max. center frequency f c 1960.0 mhz maximum insertion attenuation 1932.5 ... 1987.5 mhz lte 1) 1) averaged value of linear s-parameter over 5 mhz 2.1 3.0 db input vswr (ant port) 1930.24 ...1989.76 mhz 1.3 2.0 output vswr (rx port) 1930.24 ...1989.76 mhz 1.2 2.0 attenuation 0.2 ... 1850.0 mhz 43 46 db 80.0 mhz 50 >60 db 1852.5 ... 1907.5 mhz lte 45 52 db 2050.0 ... 2075.0 mhz 25 37 db 2075.0 ... 2350.0 mhz 35 44 db 2350.0 ... 2550.0 mhz 20 28 db 2550.0 ... 6000.0 mhz 40 51 db 5610.0 ... 5845.0 mhz 48 52 db b8663 characteristics tx - rx min. typ. @ 25?c max. isolation 1574.0 ... 1577.0 mhz 40 64 db 1852.5 ... 1907.5 mhz lte 1) 1) averaged value of linear s-parameter over 5 mhz 54 58 db 1932.5 ... 1987.5 mhz lte 55 62 db 3700.0 ... 3820.0 mhz 20 56 db 5550.0 ... 5850.0 mhz 20 53 db
5 november 26, 2014 b8663 1880.0 / 1960.0 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. maximum ratings operable temperature range t ?0/+90 ?c storage temperature range t stg ?0/+90 ?c dc voltage v dc 0 v esd voltage v esd 250 v human body model 1) 1) acc. to jesd22-a114f (hbm) esd voltage v esd 600 v charge device model 2) 2) acc. to jesd22-c101c (cdm) esd voltage v esd 150 v machine model 3) 3) acc. to jesd22-a115b (mm) input power at p in source and load impedance 50 1850.24 ... 1909.76 mhz elsewhere 2910 dbmdbm continuous wave t = 50?c, >5.000 h }
6 november 26, 2014 b8663 1880.0 / 1960.0 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet frequency response tx - ant (passband, averaged value of linear s-parameter over 5 mhz) frequency response tx - ant (averaged value of linear s-parameter over 5 mhz)
7 november 26, 2014 b8663 1880.0 / 1960.0 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. frequency response tx - ant (wideband) frequency response ant - rx (passband, averaged value of linear s-parameter over 5 mhz)
8 november 26, 2014 b8663 1880.0 / 1960.0 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet frequency response ant - rx (averaged value of linear s-parameter over 5 mhz)frequency response ant - rx (wideband)
9 november 26, 2014 b8663 1880.0 / 1960.0 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. frequency response tx - rx isolation (averaged value of linear s-parameter over 5 mhz)
10 november 26, 2014 b8663 1880.0 / 1960.0 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet vswr s 11 tx-port vswr s 33 rx-port vswr s 22 ant-port
11 november 26, 2014 b8663 1880.0 / 1960.0 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. references type b8663 ordering code b39202-b8663-p810 marking and package c61157-a8-a87 packaging f61074-v8259-z000 date codes l_1126 s-parameters b8663_nb_un.s3p (unmatched, narrow band)b8663_wb_un.s3p (unmatched, wide band) see file header for port/pin assignment table soldering profile s_6001 rohs compatible defined as compatible with the following documents: "directive 2002/95/ec of the european parliament and of the council of 27 january 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. 2005/618/ec from april 18th, 2005, amending directive 2002/95/ec of the european parliament and of the council for the purposes of establishing the maxi- mum concentration values for certain hazardous substances in electrical and electronic equipment." for further information please contact your local epcos sales office or visit our webpage at www.epcos.com . published by epcos agsystems, acoustics, waves business group p.o. box 80 17 09, 81617 munich, germany ? epcos ag 2014. this brochure replaces the previous edition. for questions on technology, prices and delivery please contact the sales offices of epcos ag or the international representatives. due to technical requirements components may contain dangerous substances. for information on the type in question please also contact one of our sales offices.
12 november 26, 2014 b8663 1880.0 / 1960.0 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet matching coils see inductor pdf-catalog http:// www .tdk.co.jp/tefe02/coil.htm#aname1 and data library for circuit simulation http://www.tdk.co.jp/etvcl/index.htm for a large variety of matching coils.
13 november 26, 2014 important notes the following applies to all products named in this publication: 1. some parts of this publication contain statements about the suitability of our products for certain areas of application . these statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. we nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. as a rule, epcos is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. for these reasons, it is always ultimately incumbent on the customer to check and decide whether an epcos product with the properties described in the product specication is suitable for use in a particular customer application. 2. we also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as speci?d. in customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. the warnings, cautions and product-speci? notes must be observed. 4. in order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous) . useful information on this will be found in our material data sheets on the internet (www.epcos.com/material). should you have any more detailed questions, please contact our sales ofces. 5. we constantly strive to improve our products. consequently, the products described in this publication may change from time to time . the same is true of the corresponding product specications. please check therefore to what extent product descriptions and specications contained in this publication are still applicable before or when you place an order. we also reserve the right to discontinue production and delivery of products . conse- quently, we cannot guarantee that all products named in this publication will always be available. the aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specic products. 6. unless otherwise agreed in individual contracts, all orders are subject to the current version of the ?eneral terms of delivery for products and services in the electrical industry published by the german electrical and electronics industry association (zvei) . 7. the trade names epcos, baoke, alu-x, ceradiode, ceralink, ceraplas, csmp, cssp, ctvs, deltacap, digisimic, dssp, filtercap, formfit, miniblue, minicell, mkd, mkk, mlsc, motorcap, pcc, phasecap, phasecube, phasemod, phicap, siferrit, sifi, sikorel, the following applies to all products named in this publication: 1. some parts of this publication contain statements about the suitability of our products for certain areas of application . these statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. we nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. as a rule, epcos is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. for these reasons, it is always ultimately incumbent on the customer to check and decide whether an epcos product with the properties described in the product specication is suitable for use in a particular customer application. 2. we also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as speci?d. in customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. the warnings, cautions and product-speci? notes must be observed. 4. in order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous) . useful information on this will be found in our material data sheets on the internet (www.epcos.com/material). should you have any more detailed questions, please contact our sales ofces. 5. we constantly strive to improve our products. consequently, the products described in this publication may change from time to time . the same is true of the corresponding product specications. please check therefore to what extent product descriptions and specications contained in this publication are still applicable before or when you place an order. we also reserve the right to discontinue production and delivery of products . conse- quently, we cannot guarantee that all products named in this publication will always be available. the aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specic products. 6. unless otherwise agreed in individual contracts, all orders are subject to the current version of the ?eneral terms of delivery for products and services in the electrical industry published by the german electrical and electronics industry association (zvei) . 7. the trade names epcos, baoke, alu-x, ceradiode, ceralink, ceraplas, csmp, cssp, ctvs, deltacap, digisimic, dssp, filtercap, formfit, miniblue, minicell, mkd, mkk, mlsc, motorcap, pcc, phasecap, phasecube, phasemod, phicap, siferrit, sifi, sikorel, silvercap, simdad, simic, simid, sineformer, siov, sip5d, sip5k, tfap, thermofuse, windcap are trademarks registered or pending in europe and in other countries. further information will be found on the internet at www.epcos.com/trademarks.

▲Up To Search▲

Price & Availability of B39202B8663P810

	To Download B39202B8663P810 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .